SA335 Grade P9

Looking for Quality ASTM A/ASME SA335 GRADES P5, P9, P11, P22, P91 CHROME MOLY Pipe Supplier?ASTM A335 is the Standard Specification is known for Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceWe can help supply all of the ASTM A335/ASME SA335 P5, P9, P11, P22, P91 grade alloy steel pipes and alloy steel tubes that your company needs for use in the oil or natural gas industries. ASTM A/ASME SA335 Grade P5, P9, P11, P22, and P91 are available in all standard grades and sizes.Sambhav Pipes & Fittings is a leading supplier & dealers of seamless alloy steel pipes and alloy steel tubes in “Chrome Moly” including top selling line pipe grades ASTM A/ASME SA335 Grade P5, P9, P11, P22, and P91 available from stock or in short delivery time. alloy steel pipes and alloy steel tubes are stocked in size range of 1/2” NB through 36”. Alloy steel tubes are generally available in stock with OD sizes in all standard sizes and thicknesses.ASTM A335/ASME SA 335 P5, P9, P11, P22, P91 Seamless Pipes, Tubes Chemical Composition %GradeCMnPSSiCrMoP50.15max0.30-0.600.0250.0250.50 max4.00-6.000.45-0.65P90.15 max0.30-0.600.0250.0250.25-1.008.00-10.000.90-1.10P110.05-0.150.30-0.600.0250.0250.50-1.001.00-1.500.44-0.65P220.05-0.150.30-0.600.0250.0250.50 max1.90-2.600.87-1.13P910.08-0.120.30-0.600.020.010.20-0.508.00-9.500.85-1.05 V 0.18-0.25N 0.03-0.07Ni 0.40 maxAl 0.02 maxCb 0.06-0.10Ti 0.01 maxZr 0.01 maxASTM A335/ASME SA 335 P5, P9, P11, P22, P91 Seamless Pipes, Tubes Mechanical PropertiesMechanical PropertiesGradeTensile strength(MPa)Yield strength(MPa)Elongation(%)Impact energy(J)HardnessP11≥ 415≥ 205≥ 22≥ 35≤ 163HBP12≥ 415≥ 220≥ 22≥ 35≤ 163HBP22≥ 415≥ 205≥ 22≥ 35≤ 163HBP5≥ 415≥ 205≥ 22≥ 35≤ 187HBP91585~760≥ 415≥ 20≥ 35≤ 250HBP92≥ 620≥ 440≥ 20≥ 35250HBTolerance for ASTM A335/ASME SA 335 P5, P9, P11, P22, P91 Seamless PipesNPSOD ToleranceNPSWT Tolerance1/8″ ≤ NPS ≤ 1 1/2″+/- 0.41/8″ ≤ NPS ≤ 2 1/2″ , All T/D ratios.+20%, -12.5%1 1/2 < NPS ≤ 4″+/- 0.79NPS ≥ 2 1/2″ , T/D ≤ 5%+22.5%, -12.5%4″ < NPS ≤ 8″+1.59, -0.79NPS ≥ 2 1/2″ , T/D > 5%+15%, -12.5%8″ < NPS ≤ 12″+2.38, -0.79(T= Specified Wall Thickness; D = Specified Outside Diameter)NPS > 12″+/- 1%