Stainless Steel Pipes 410

410 stainless steel is a hardenable martensitic stainless steel alloy. Unlike austenitic grades it can be heat treated ("quench and temper") to generate high strength with good ductility. 410 alloy is required when strength, hardness and wear resistance is required with some corrosion resistance. Due to the hardening capabilities of this steel, other properties and the resulting performance of this material are somewhat compromised. The alloy can only effectively be used in mildly corrosive environments. The operating temperature range is limited a) a loss of strength by over tempering at elevated temperatures and b) a loss of ductility at sub-zero temperatures.Type 410 is officially a stainless steel but characteristically the material is actually a compromise of high carbon steel alloy (which promotes wear resistance) with chromium stainless steel (which promotes corrosion resistance). This steel is ideal for use in the manufacture of highly stressed parts found in a variety of industries including petrochemical, automotive and power generation. Product Range Specifications: ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790 Sizes (Seamless): 1/2" NB - 24" NB Sizes (ERW): 1/2" NB - 24" NB Sizes (EFW): 6" NB - 100" NB Wall Thickness available: Schedule 5S - Schedule XXS (heavier on request) Other Materials Testing: NACE MR0175, H2 Service, Oxygen Service, Cryo Service, etc.Background of 410 Stainless Steel Pipes and Tubes Grade 410 is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a "quench-and-temper" heat treatment. It contains a minimum of 11.5 per cent chromium, just sufficient to give corrosion resistance properties. It achieves maximum corrosion resistance when it has been hardened and tempered and then polished. Grade 410 is a general purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required. Martensitic stainless steels are optimised for high hardness, and other properties are to some degree compromised. Fabrication must be by methods that allow for poor weldability and usually the need for a final heat treatment. Corrosion resistance of the martensitic grades is lower than that of the common austenitic grades, and their useful operating temperature range is limited by their loss of ductility at sub-zero temperatures and loss of strength by over-tempering at elevated temperatures. Composition of 410 Stainless Steel Pipes and Tubes Typical compositional ranges for grade 410 stainless steels are given in table 1. Table 1. Composition ranges for 410 grade stainless steelGradeCMnSiPSCrMoNiN410min. max.- 0.15- 1.00- 1.00- 0.040- 0.03011.5 13.5-0.75-