ADEX INTL - | E-Showroom
ADEX INTL - | E-Showroom
All dry material is poured into the loading bucket manually or through the scraper blade (optional). In the version without loading bucket, the dry material is poured directly into the barrel manually. The bucketis raised hydraulically by the double acting piston until it reaches the maximum inclination of 65°. The material descends into the barrel where the powerful mixer (already in operation) begins its action. About halfway through the loading of the material, the water is added manually inside the barrel. When loading is complete, without waiting times, the hatch is closed and the barrel is pressurized by pressing the “Automatic cycle” button on the control panel. The air flow forcefully conveys the material through the hoses until it reaches the end point where the flow breaker stand is installed. When the barrel is empty, the air flow stops automatically and the machine is ready for a new loading. The powerful horizontal axis mixer also homogeneously mixes particularly difficult and / or fiber-rich products. For those particular materials that require a longer mixing time, it is possible to set a time of your choice, which will delay the emptying phase after pressing the “Automatic cycle” button. The hoses at the end of the cycle always remain empty. This simplifies washing operations at the end of the day. Simply clean the barrel with water and pump the appropriate sponge ball into the hoses.Mover 270d EVO is equipped with safety devices and reversal of the mixer rotation direction, useful in case of accidental blocking of the mixer or clogging of the hose to facilitate release. With the help of additional compressors and special accessories, it can reach high distances and pumping heights.
