IMER STEP 120 Three-Phase Screw Pump

The mixture prepared in the mixer is poured directly into the hopper through a vibrating grid that filters out any inert material of excessive size. The material is sucked by the eccentric screw pump and pushed into the hose until it reaches the opposite end where the spray gun is located. The air is provided by the standard integrated compressor projects the material through the gun onto the application area. The machine can be started and stopped directly via the air tap located on the spray gun. In the case of filling mortars / grouts or self-levelling screeds, “open hose” is used. For these applications, the On / Off wired remote control is available as an optional accessory. Equipped with an exclusive IMER IM25L pumping unit capable of satisfying most pumping and spraying needs. It can be further optimized for specific needs, due to a wide range of optional accessories. Step 120 three-phase offers two pumping speeds to adapt the pump to different applications. In some applications where the quantities of material to be pumped are significant, the machine can be equipped with a high-performance pumping unit and loaded directly by a concrete mixer or dumper.

• The mixture prepared in the mixer is poured directly into the hopper through a vibrating grid that filters out any inert material of excessive size.
• The material is sucked by the eccentric screw pump and pushed into the hose until it reaches the opposite end where the spray gun is located.
• The air is provided by the standard integrated compressor projects the material through the gun onto the application area.
• The machine can be started and stopped directly via the air tap located on the spray gun.